Welcome to Alpha Supply Warehouse! (888) 780-2752

Restoration

Grid List

Set Descending Direction

8 Item(s)

  1. ShockWave - 1 Gal.
    $81.13
    ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave is especially useful as an all-in-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave is registered to kill over 120 organisms including Norwalk Virus, and is approved for the H5N1 avian flu. ShockWave is designed to be diluted two ounces per gallon of water*, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs. ShockWave is available in 1-gallon jugs and convenient 10-ounce bottles (CR646EA), the proper amount for five gallons of usable product. NOTE: This item can not be shipped to California or Canada Replacement Item for California Only: Learn More
  2. Shockwave - 4 Gal. Case
    $227.20
    ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave is especially useful as an all-in-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave is registered to kill over 120 organisms including Norwalk Virus, and is approved for the H5N1 avian flu. ShockWave is designed to be diluted two ounces per gallon of water*, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs. ShockWave is available in 1-gallon jugs and convenient 10-ounce bottles (CR646EA), the proper amount for five gallons of usable product. NOTE: This item can not be shipped to California or Canada Replacement Item for California Only: Learn More
  3. ShockWave RTU - 1 Gal.
    $35.92
    ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave is especially useful as an all-in-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave is registered to kill over 120 organisms including Norwalk Virus, and is approved for the H5N1 avian flu. Shockwave RTU is a convenient ready-to-use formulation. *For most applications- see data sheet for additional information NOTE: This item can not be shipped to California or Canada Replacement Item for California Only: Learn More
  4. AfterShock Fungicidal Coating - 5 Gal. Pail
    $396.88
    AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after precleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate in durability in combination with excellent fungicidal characteristics to address mold growth from water damage. AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galavanized metal. AfterShock is also recommended for use on interior wood framing, primed metal, concrete, and wallboard inside the wall cavity. Do not use for HVAC system applications. NOTE: This item can not be shipped to California or Canada Replacement Item for California Only: Learn More
  5. Sporicidin Mold Resistant Coating - 4 Gal. Case
    $266.07
    Sporicidin® Mold Resistant Coating is an easy-to-use, water-based permanent coating that incorporates a unique zero VOC, EPA registered antimicrobial that prevents the growth of mold on the coating film. Developed for high moisture areas, this product forms a dehydration finish that does not allow moisture penetration, thus preventing the growth of mold on the film. The quality of the product, along with the anti-abrasion and anti-scratch qualities, exceed the performance requirements of the following microbiological resistant tests: ASTM D3273, D3274. Sporicidin Mold Resistant Coatings can be used on any new or existing building material before, during, or after installation. It quickly penetrates and adheres to porous and non-porous surfaces, providing a stain-blocking coating that will not blister, crack, or chip and restores the integrity of damaged materials. Coverage ranges from 35 sq. ft/can to 1,000 sq.ft/gallon depending on which product is used, substrate porosity and surface smoothness. Features and Benefits: Mold resistance on the film Special UV detectable pigment for warranty verification (available on clear finish items only) Non-leaching and non-toxic Excellent longevity Bonds to organic and inorganic surfaces Superior moisture prevention Breathable and paintable Designed to provide a uniform primer or can be left as the top coat Features phenomenal hiding and enamel holdout Nanotechnology provides excellent durability and adhesion Provides protection from water penetration Seals water extractives and tannins in redwood and cedar. Dry time: 30 min. to two hours depending on humidity and temperature (Item dependent Learn More
  6. Concrobium Mold Control - 5 Gal. Pail
    $149.98
    A better, bleach-free way to fight mold. Concrobium Mold Control is a professional-grade, EPA-registered solution that eliminates mold and prevents it from coming back. Concrobium Mold Control contains zero toxic chemicals such as bleach or ammonia, and is Green-Spec listed. The solution is ideal for mold remediation in homes and businesses, and for mold clean-up and prevention following water damage. Technical advantages of Concrobium Mold Control include: Offers mold elimination and prevention in a single solution Has absolutely no odor and requires zero isolation time Requires no special handling or protective equipment Can be used on hard surfaces or fabrics Can be fogged to treat large and inaccessible spaces Introduces zero VOCs into the environment EPA registration #: 82552-1. This product is engineered to eliminate and prevent mold. To eliminate mold staining, treat the affected area with Concrobium Mold Stain Remover. Follow cleaning with another application of Concrobium Mold Control to prevent mold from returning. Dilution Ratios: RTU Learn More
  7. IAQ 2000 Concentrate Disinfectant - 4 Gal. Case
    $113.93
    Fiberlock IAQ 2000 is a phosphate-free, quaternary ammonium chloride formulation designed for use in a diverse assortment of buildings, both residential and commercial to kill and control fungal, bacterial and viral growth. Fiberlock IAQ 2000 is a concentrated formula that will disinfect hard, nonporous inanimate environmental surfaces. Use IAQ 2000 to clean and disinfect mold-contaminated surfaces as part of all mold-remediation projects. Fiberlock IAQ 2000 is an EPA-registered product. Dilution Ratios: n/a Learn More
  8. Unsmoke Degrease-All - 1 Gal.
    $43.62
    Degrease-All is tough enough to remove heavy residues, but gentle enough to be used as a traffic lane cleaner or upholstery pre-spray. A general-purpose cleaner, Degrease-All is highly effective on particulate and greasy soils, and can be used on most hard surfaces. No intoxicating fumes. Learn More

Grid List

Set Descending Direction

8 Item(s)